diff --git a/CHANGELOG b/CHANGELOG
index 27ce62c..d6363d6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
+  Patch by Murray Jensen, 08 Jul 2005
+
 * Add (some) definitions for the MPC85xx local bus controller
   Patch by Murray Jensen, 08 Jul 2005
 
diff --git a/drivers/tsec.c b/drivers/tsec.c
index f860dae..4c5e1b5 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -940,6 +940,56 @@
 	},
 };
 
+/* Parse the DP83865's link and auto-neg status register for speed and duplex
+ * information */
+uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
+{
+	switch (mii_reg & MIIM_DP83865_SPD_MASK) {
+
+	case MIIM_DP83865_SPD_1000:
+		priv->speed = 1000;
+		break;
+
+	case MIIM_DP83865_SPD_100:
+		priv->speed = 100;
+		break;
+
+	default:
+		priv->speed = 10;
+		break;
+
+	}
+
+	if (mii_reg & MIIM_DP83865_DPX_FULL)
+		priv->duplexity = 1;
+	else
+		priv->duplexity = 0;
+
+	return 0;
+}
+
+struct phy_info phy_info_dp83865 = {
+	0x20005c7,
+	"NatSemi DP83865",
+	4,
+	(struct phy_cmd[]) { /* config */
+		{MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
+		{miim_end,}
+	},
+	(struct phy_cmd[]) { /* startup */
+		/* Status is read once to clear old link state */
+		{MIIM_STATUS, miim_read, NULL},
+		/* Auto-negotiate */
+		{MIIM_STATUS, miim_read, &mii_parse_sr},
+		/* Read the link and auto-neg status */
+		{MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
+		{miim_end,}
+	},
+	(struct phy_cmd[]) { /* shutdown */
+		{miim_end,}
+	},
+};
+
 struct phy_info *phy_info[] = {
 #if 0
 	&phy_info_cis8201,
@@ -949,6 +999,7 @@
 	&phy_info_M88E1111S,
 	&phy_info_dm9161,
 	&phy_info_lxt971,
+	&phy_info_dp83865,
 	NULL
 };
 
diff --git a/drivers/tsec.h b/drivers/tsec.h
index e92b53a..b55b299 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -168,6 +168,16 @@
 #define MIIM_LXT971_SR2_100HDX     0x4000  /* 100 Mbit half duplex selected */
 #define MIIM_LXT971_SR2_100FDX     0x4200  /* 100 Mbit full duplex selected */
 
+/* DP83865 Control register values */
+#define MIIM_DP83865_CR_INIT	0x9200
+
+/* DP83865 Link and Auto-Neg Status Register */
+#define MIIM_DP83865_LANR	0x11
+#define MIIM_DP83865_SPD_MASK	0x0018
+#define MIIM_DP83865_SPD_1000	0x0010
+#define MIIM_DP83865_SPD_100	0x0008
+#define MIIM_DP83865_DPX_FULL	0x0002
+
 #define MIIM_READ_COMMAND       0x00000001
 
 #define MRBLR_INIT_SETTINGS	PKTSIZE_ALIGN